Water Skiing

How to Cross the Wake on Water Skis

How to cross the wake on water skis: body position, step-by-step crossings in both directions, handling slack, one-ski tips, common mistakes and drills.

On this page
  1. Why Crossing the Wake Feels Tricky
  2. Before You Try
  3. Body Position for Crossing
  4. Step by Step: Crossing From Inside to Outside
  5. Coming Back In and Handling Slack
  6. Crossing the Wake on One Ski
  7. Common Mistakes and Fixes
  8. Practice Drills
  9. How the Driver Can Help

Why Crossing the Wake Feels Tricky

Behind the boat, there’s a smooth strip of water between two wake ridges. Crossing those ridges for the first time can feel intimidating: the skis bump over them, your speed changes, and the rope pull shifts. But with the right body position, crossing the wake becomes one of the most fun parts of water skiing, and it opens up the whole width of the water for carving turns.

The key idea is simple: you cross the wake by leaning against the rope and letting your skis carry you, not by steering with your arms or standing up tall.

Before You Try

You’re ready to work on wake crossings once you can:

  • Get up reliably and ski comfortably inside the wake.
  • Make gentle turns from side to side within the smooth water.
  • Ride with your knees bent and arms straight without thinking about it.

If you’re not quite there yet, our guide to how to water ski behind a boat covers the fundamentals.

Body Position for Crossing

Get this right and most of the crossing takes care of itself:

  • Knees bent, ready to absorb the bump of the wake like shock absorbers.
  • Arms straight, with the handle low, near your hips.
  • Chest up and shoulders back, without bending forward at the waist.
  • Weight centered over your feet, not too far back.
  • Skis parallel, about shoulder width apart, and on a slight edge in the direction you’re traveling.
  • Eyes up, looking where you want to go or toward the boat, not down at the wake.

Step by Step: Crossing From Inside to Outside

Start with this direction, from the smooth water out across one wake ridge to the outside.

  1. Start in the middle of the wake, skiing straight and balanced.
  2. Shift your weight gently toward the side you want to go, rolling your skis slightly onto that edge. Lean away from the boat as if you’re resisting the rope.
  3. Hold a steady angle. Aim to cross at a moderate angle, neither straight up and over nor almost parallel to the wake.
  4. Keep the edge and lean as you hit the wake. Don’t flatten your skis or stand up right before the ridge.
  5. Absorb the bump by letting your knees bend as the skis ride over the wake.
  6. Keep going past the wake, then ease off the edge and ride outside the wake for a moment.

Coming Back In and Handling Slack

Coming back across the wake toward the middle is often harder, because you’re moving toward the boat and the rope can go slack.

  1. Edge back toward the wake at a moderate angle, keeping your lean against the rope.
  2. Keep your arms straight and the handle low. Don’t let your arms bend or the handle drift up.
  3. Cross the wake with soft knees, just as before.
  4. Expect the rope to tighten again. If it went a little slack, keep your position, and the line will come tight smoothly as you settle into the middle. Bend your knees to absorb the tug rather than letting it pull you forward.

Slack comes from turning too sharply toward the boat or flattening your skis. Smooth, moderate angles keep the rope tight.

Crossing the Wake on One Ski

On a slalom ski, wake crossing is similar but more sensitive to body position. If you’re new to one ski, see our guide to slalom water skiing first.

  • Lead with your hips, keeping them over the ski rather than sitting back.
  • Stay on a solid edge all the way across. Flattening the ski in the wake is a common cause of falls.
  • Keep the handle close to your hips and your arms straight.
  • Keep both knees soft, especially the back one.
  • Look across, to where you’re going, not at the wake.

Crossing the wake is the foundation of running a slalom course, where skiers cut through the wake between every pair of turn buoys and through the entrance gate. Learn more in are you supposed to touch the gates in slalom.

Common Mistakes and Fixes

Mistake What happens Fix
Standing up straight The wake knocks you off balance Keep your knees bent and absorb the bump
Pulling the handle in Rope goes slack, then jerks you Keep arms straight and the handle low
Bending forward at the waist You get pulled over your skis Chest up, shoulders back
Crossing too straight on A big bounce over the wake Cross at a moderate angle
Flattening the skis in the wake Skis slide out or catch Hold your edge all the way across
Looking down Balance suffers Look ahead or at the boat
Turning sharply back toward the boat Slack rope Use smooth, gradual turns

Practice Drills

  • Small crossings first. Cross one wake ridge, ride outside for a moment, and come back. Repeat on the other side.
  • Wake-to-wake crossings. Once single crossings feel solid, go from outside one wake ridge all the way across to the other.
  • Ride outside the wake. Spend time cruising outside to get used to how the pull feels from there.
  • Count your crossings. Aim for a set number of smooth crossings per run rather than one big cut.

How the Driver Can Help

  • Hold a steady speed. Speed changes mid-crossing are hard to manage.
  • Drive a straight line. Turns change the wake’s shape and position.
  • Keep the speed suitable for the skier, often a little slower for beginners, which also tends to keep the wake smaller.
  • Avoid crowded, choppy areas where other boats’ wakes add to the bumps.

The same principles apply to kids learning to cross the wake; see how to teach a kid to water ski for more on teaching young skiers.

The complete guide to water skiing

How to Water Ski Behind a Boat
Read the guide

Keep exploring

Guides from other topics

All topics →