Water Skiing

Adaptive Water Skiing Equipment

A guide to adaptive water skiing equipment: sit-skis, outriggers, booms, adapted handles, quick releases and setups for standing and visually impaired skiers.

On this page
  1. Who Adaptive Water Skiing Is For
  2. Sit-Skis
  3. Outriggers and Stabilizers
  4. Equipment for Standing Skiers
  5. Handles and Grip Aids
  6. Boat Equipment: Booms, Pylons and Quick Releases
  7. Equipment and Communication for Visually Impaired Skiers
  8. The People Who Make It Work
  9. Safety Considerations
  10. How to Get Started

Who Adaptive Water Skiing Is For

Adaptive water skiing uses specialized equipment and techniques so people with physical, sensory or cognitive disabilities can water ski. Skiers with spinal cord injuries, amputations, cerebral palsy, multiple sclerosis, visual impairments and many other conditions take part, from first-time recreational skiers to international competitors.

The equipment falls into a few groups: skis and seats, stabilizing aids, handles, boat equipment, and communication tools. Just as important are the trained people around the skier. Below is an overview of each. Exact setups vary a lot from skier to skier, so treat this as a starting point and rely on experienced adaptive instructors for specific choices.

Sit-Skis

A sit-ski lets a skier water ski while seated. It’s the most recognizable piece of adaptive water ski equipment and is widely used by skiers with limited or no leg function.

A sit-ski typically consists of a single ski with a seat or cage mounted on top. The skier is strapped into the seat, with their legs supported in front. Many sit-skis have a suspension system between the seat and the ski to absorb bumps from chop and the wake.

Beginner sit-skis

Beginners usually start on a wide, very stable sit-ski. These are broader and flatter than performance models, more like a board with a seat, so they’re harder to tip over and easier to get up on. The Kan Ski is a well-known example of this style. Beginner sit-skis are often used with outriggers or a boom (see below) for extra stability.

Performance sit-skis

As skiers progress, they can move to narrower sit-skis that carve and turn more like a slalom ski. Experienced sit-skiers run slalom courses, do tricks and even jump. These skis are less forgiving and are typically set up for the individual skier’s body and ability.

Outriggers and Stabilizers

Outriggers are small floats that add side-to-side stability. On some sit-skis they attach to the sides of the ski; in other setups the skier holds outrigger poles, a bit like ski poles with floats on the end. Either way, they help keep a beginner upright while they learn to balance. As balance improves, outriggers are usually removed.

Some skiers also use straps, padding and custom seat inserts to support their trunk and keep them positioned correctly in the seat.

Equipment for Standing Skiers

Many adaptive skiers ski standing up, sometimes with modified gear:

  • Skis joined at the tips. A tip connector (often called a “ski bra”) holds two skis together so they can’t spread apart or cross. This is the same idea used on children’s trainer skis.
  • Wider or longer skis for extra stability and easier starts.
  • Adapted bindings, such as bindings modified for a prosthesis or for an ankle that needs more support.
  • Prosthetics. Some skiers with leg amputations ski with a prosthesis designed for water use; others ski on one ski without it. This is an individual decision best made with a prosthetist and an experienced instructor.

Our guide to slalom water skiing covers the basics of single-ski bindings that many standing adaptive skiers start from.

Handles and Grip Aids

Holding a handle is hard for skiers with limited hand or arm function, amputations or weak grip. Adaptations include:

  • Modified handles, such as handles shaped for one-handed use or handles with extra padding.
  • Grip aids that help hold the hand on the handle.
  • Harness-style or body-mounted attachments in some setups.

A crucial rule: any setup that keeps the skier attached to the rope must be paired with a reliable quick-release system on the boat and a person whose only job is to operate it. A skier who can’t let go on their own must be released by the boat crew immediately if they fall. Never improvise a strap or wrap that holds a skier to the rope.

Boat Equipment: Booms, Pylons and Quick Releases

The boat often needs extra equipment for adaptive skiing:

  • Booms. A boom is a rigid pole that extends out over the water from the side of the boat. The skier holds the boom or a short rope hanging from it, staying close to the boat where instructors can see and talk to them. Booms are a common way to learn sit-skiing and to build confidence before moving to a full-length rope.
  • Ski pylons. A sturdy, centrally mounted pylon gives a consistent pull.
  • Quick-release mechanisms. These allow someone on the boat to release the rope instantly. They’re essential whenever the skier can’t let go of the handle themselves.

Equipment and Communication for Visually Impaired Skiers

Blind and visually impaired skiers often ski standing on standard skis, with communication doing much of the adaptive work. Approaches include:

  • Radio or audio communication, where a guide in the boat talks the skier through position, turns and the approach to features.
  • Agreed signals through the rope, such as tugs, for simple messages.
  • Audio guidance in competition, which helps skiers locate slalom buoys or the jump ramp.

Before skiing, the skier and guide agree on commands and practice them. Our article on water skiing hand signals covers the standard signals that sighted skiers use, which adaptive teams often adapt for their own needs.

The People Who Make It Work

Adaptive skiing is a team activity. A typical session may involve:

  • The driver, experienced in towing adaptive skiers and keeping speeds steady.
  • An observer who watches the skier constantly.
  • A release operator, when needed, who operates the quick release.
  • In-water helpers who help the skier into the equipment, stabilize the ski at the start and assist after falls.
  • An instructor or coach who chooses the setup and guides progression.

Volunteers make up much of this team at many adaptive clinics.

Safety Considerations

General tow-sport safety applies, plus some extra points:

  • Life jackets must fit correctly with the skier’s seat or equipment, and should keep the skier face-up in the water.
  • Fast assistance after falls matters more when a skier is strapped into a seat or can’t swim unaided. Helpers should be in the water or nearby, ready to right a capsized sit-ski.
  • Medical considerations such as skin protection, temperature regulation and joint protection vary by condition. Skiers should talk to their doctor or therapist before starting, and programs often ask about these during sign-up.
  • Calm water and controlled speeds are especially important when learning.

How to Get Started

The best way to try adaptive water skiing is through an organized program. Clinics run by adaptive water ski organizations and clubs typically provide the equipment, trained volunteers and a suitable boat, so new skiers don’t need to buy anything. In the United States, USA Water Ski & Wake Sports has an adaptive water skiing division, and in the UK the British Disabled Water Ski & Wakeboard Association runs programs. Many local water ski clubs and disability sports organizations also host clinics.

When you contact a program, ask what equipment they have, whether they’ve worked with skiers with your type of disability, and what you should bring. Once you’re skiing, experienced instructors can help you decide when it makes sense to invest in your own sit-ski or adapted gear. For the general technique that underlies all water skiing, see our guide to how to water ski behind a boat.

The complete guide to water skiing

How to Water Ski Behind a Boat
Read the guide

Keep exploring

Guides from other topics

All topics →