Water Skiing

Are you supposed to touch the gates in slalom?

In alpine slalom, racers hit gates on purpose; in water ski slalom, you ski through the gate buoys. Here's what the rules require in each sport.

On this page
  1. The Short Answer
  2. Alpine Slalom: Hitting Gates Is Part of the Technique
  3. Water Ski Slalom: Gates Are Buoys You Ski Through
  4. Skiing a Course for Fun
  5. Quick Comparison

The Short Answer

It depends which kind of slalom you mean:

  • Alpine (snow) ski slalom: Yes, touching the gates is normal. Racers deliberately knock the gate poles out of the way with their shins, hands and pole guards so they can ski the tightest, fastest line. What matters for the rules isn’t whether you touch a gate but whether you pass it correctly.
  • Water ski slalom: The “gates” are pairs of buoys at the start and end of the course, and you’re supposed to ski between them, not hit them. Brushing a buoy isn’t usually the problem; missing the gate is.

Alpine Slalom: Hitting Gates Is Part of the Technique

Why racers hit the gates

In slalom, the gates are set close together, and the fastest line passes extremely close to each turning pole. Rather than steer around the pole, racers ski right at it and push it aside as they pass, a technique often called cross-blocking or “clearing” the gate. The poles are hinged at the base so they snap down and spring back up.

Hitting the gate isn’t the goal in itself; it’s a side effect of skiing the shortest line. Beginners and recreational racers on easier courses often go around the gates without touching them, and that’s fine too.

What the rules actually require

In alpine racing, a gate is generally considered passed correctly when both of the racer’s skis and feet cross the gate line on the correct side. Key points:

  • Touching or knocking down a gate isn’t a penalty in itself.
  • Straddling a gate, where one ski passes on each side of the pole, is a fault that usually leads to disqualification.
  • Missing a gate means the racer must either climb back (“hike”) to pass it correctly or be disqualified. Hiking costs a lot of time.

Exact wording and rules differ by organization and level, so racers should follow the current rules for their competition.

Gear for gate contact

Because gate contact is constant in slalom, racers usually wear:

  • Shin guards over their boots and lower legs
  • Pole guards (hand guards) mounted on their poles
  • Helmets with chin guards to protect the face
  • Sometimes padded arm or forearm protection

Giant slalom and faster disciplines have wider-set gates with panels, and racers make less deliberate contact with them.

Water Ski Slalom: Gates Are Buoys You Ski Through

On the water, “slalom” refers to skiing on one ski, and the slalom course is a set of buoys. If you’re new to the sport, our guide to slalom water skiing covers the basics.

Entrance and exit gates

A tournament water ski slalom course has a pair of gate buoys at each end. The skier must ski between the entrance gate buoys to start the pass and through the exit gate buoys at the far end. Many courses also have pre-gate buoys before the entrance to help skiers set up their line.

To make the entrance gate, skiers typically pull out to one side, then cut hard across the wake and through the gate on their way to the first turn buoy. Timing that cut is one of the first course skills skiers learn; our guide on how to cross the wake on water skis covers the underlying technique.

What about the turn buoys?

Between the gates are six turn buoys in a zigzag. The skier must ski around the outside of each one. Skiers often clip or brush these buoys with the ski, especially when pushing their limits, and contact on its own isn’t the same as missing the buoy. What counts is whether the skier’s path goes around the outside of the buoy.

What happens if you miss a gate

In tournament scoring, missing the entrance gate generally means the pass doesn’t score, and the exit gate must also be made for the pass to count as complete. The precise scoring details, including how partial buoys and gate misses are recorded, are set out in the current USA Water Ski & Wake Sports (AWSA) and IWWF rulebooks, which skiers in competition should check.

Skiing a Course for Fun

If you’re running a course recreationally, the same idea applies: go through the gates, go around the turn buoys, and don’t worry about the occasional clip. Most recreational skiers begin by skiing through the course without trying to round the buoys at all, then progressing to the gates and turn buoys at a slower speed with a full-length rope. As you improve, the boat speeds up and the rope shortens, which is where terms like “28 off” come from; see our guide to water ski slang and lingo.

Quick Comparison

Alpine ski slalom Water ski slalom
What the “gates” are Hinged poles on a snow course Pairs of buoys at each end of the course
Are you supposed to touch them? Contact is normal and often deliberate No; you ski between the gate buoys
What matters for the rules Passing each gate on the correct line Skiing through the gates and around the turn buoys
Common fault Straddling or missing a gate Missing the entrance or exit gate, or missing a turn buoy
Protective gear Shin guards, pole guards, chin-guard helmet Life jacket; no gate-specific gear

The complete guide to water skiing

How to Water Ski Behind a Boat
Read the guide

Keep exploring

Guides from other topics

All topics →

How Wake Boats Work

How wake boats turn weight, hull shape, speed and surf systems into rideable wakes and waves, plus a plain-English tour of the parts of a wakeboard boat.