Quick answer
- Ski boats are built to make the smallest, flattest wake possible at skiing speeds. They’re best for slalom and course skiing.
- Wake boats are built to make a large, shaped wake at lower speeds. They’re best for wakeboarding and wakesurfing.
- “Speed boats” (general runabouts, bowriders and performance boats) aren’t optimized for either. Many can pull skiers, tubers and beginner wakeboarders, but they’re generally not suitable for wakesurfing.
If you want to do a bit of everything, a crossover inboard is often the compromise.
The three boat types compared
Ski boats
Traditional ski boats use a direct-drive inboard: the engine sits in the middle of the boat and drives a propeller under the hull. The hull is designed to run flat and shed a small wake at speeds around the high 20s to mid 30s mph. Classic examples include the Ski Nautique, MasterCraft ProStar and Malibu Response TXi.
Strengths: very small wake, precise tracking and an excellent pull for slalom. Limitations: a small wakeboard wake, little or no ballast, and usually fewer amenities.
Wake boats
Most wake boats use a V-drive inboard. The engine sits at the stern and the prop under the hull. That shifts weight aft, which, combined with ballast and wake-shaping hardware, builds a big wake at around 10–24 mph. Our best wakeboard boats and brands guide covers the main builders.
Strengths: large, adjustable wakes and surf waves, towers, lots of seating. Limitations: a high price, heavy weight and high fuel use. They’re also usually not ideal for serious slalom when ballasted.
“Speed boats”: runabouts, bowriders and performance boats
“Speed boat” is a loose term. Most people mean a family bowrider or runabout with an outboard or sterndrive, or a performance boat built for top speed. Family runabouts are versatile and often less expensive than inboard tow boats. Performance boats prioritize speed over watersports and aren’t typically used for towing.
Comparison table
| Ski boat | Wake boat | Runabout / bowrider | |
|---|---|---|---|
| Typical drive | Direct-drive inboard | V-drive inboard | Outboard or sterndrive |
| Prop location | Under hull | Under hull, forward of stern | At the stern |
| Wake | Small and flat | Large, adjustable | Moderate, not optimized |
| Typical tow speeds | ~20–36 mph (skiing) | ~10–12 mph surf, high teens–low 20s wakeboard | Varies |
| Wakesurfing | Not suited | Designed for it | Not recommended (prop exposure) |
| Best for | Slalom, course skiing | Wakeboard, wakesurf | Cruising, tubing, recreational skiing |
Speeds are typical ranges, not rules. Rider weight, skill and preference all change the ideal number.
Drive layout and rider safety
The biggest safety difference between these boats is where the propeller is.
- On inboards, the prop sits under the hull, forward of the transom.
- On outboards and conventional sterndrives, the prop is at the very back of the boat, close to the swim platform.
For skiing and wakeboarding, riders are normally a long rope’s length behind the boat, so any boat that’s properly operated can tow them. But wakesurfing puts the rider just a few feet behind the transom, and boarding from the platform puts people right next to the drive. That’s why wakesurfing behind outboards and conventional sterndrives is widely discouraged. Some newer sterndrive models use forward-facing drives, with the props at the front of the drive unit, and are marketed for surfing. Follow the manufacturer’s guidance for any specific boat.
Whatever you drive, shut the engine off when people are boarding or near the stern. Also be aware that exhaust gases, including carbon monoxide, can build up around the swim platform of any boat, especially at low speed or idle.
Can a speed boat pull a water skier?
Usually, yes. Most family runabouts and bowriders with enough power can pull a recreational skier on two skis or a slalom ski. Many people learned to ski behind exactly this kind of boat. Things to keep in mind:
- Power. The boat needs enough horsepower to pull a skier up and hold speed, especially for heavier adults or deep-water slalom starts.
- Tow point. Use a proper ski tow eye, pylon or tower. Don’t tie a rope to random cleats or rails.
- Wake. The wake will be bigger and less predictable than a ski boat’s. That’s fine for recreational skiing, less so for course skiing.
- Observer. Many states require an observer in addition to the driver when towing someone. Check your local laws.
How fast you need to go depends on the skier. Beginners on two skis often ride somewhere around the high teens to mid 20s mph, and slalom skiers tend to go faster. See how fast is a ski boat for more on speeds.
Can a wake boat pull a skier?
Yes, especially with the ballast drained. Many wake boats can pull recreational skiers well. A ballasted wake boat makes a wake that’s uncomfortable for slalom, though, and a heavy hull can feel less precise than a dedicated ski boat. Keen course skiers usually prefer a true ski boat.
Crossover boats
Crossovers try to cover skiing, wakeboarding and surfing in one boat. Examples include the Malibu Wakesetter 20 VTX and multi-sport models such as the Nautique GS series. Some are built on tournament-style hulls with ballast and surf systems added. They won’t match a dedicated ski boat for slalom or a flagship wake boat for surf waves, but for a family that does a bit of everything they can be the best single boat. Our small wake boats guide covers compact crossovers.
Which should you buy?
- Mostly slalom or course skiing: a ski boat.
- Mostly wakeboarding or wakesurfing: a wake boat. Our best used boats for wakesurfing is a good place to start on a budget.
- Mixed family watersports, including some surfing: a crossover or a mid-size wake boat.
- Cruising, tubing and casual skiing, no surfing: a runabout or bowrider is often the most practical and affordable choice. See what are the most affordable boat brands.
For budgeting across these options, see our wakeboard boat cost guide.