Buying a Wake Boat

Best Used Boats for Wakesurfing

Which older boats make good wakesurf boats, the used models riders often recommend, how to surf a boat without a surf system, and what to check on an aging hull.

On this page
  1. What makes an older boat good for wakesurfing
  2. Used models riders often recommend
  3. Surfing an older boat without a surf system
  4. Boats to avoid for wakesurfing
  5. Is a heavier boat better?
  6. How fast should a boat go for wakesurfing?
  7. Age-related issues to check
  8. Setting a realistic budget

What makes an older boat good for wakesurfing

You don’t need a brand-new boat to wakesurf. Plenty of riders learn behind boats that are 10, 15 or even 20 years old. What matters is whether the boat has the right basic layout and is in good mechanical shape.

Must-haves

  • An inboard V-drive (or another drive system the manufacturer specifically approves for wakesurfing). A V-drive puts the engine weight toward the stern and the propeller under the hull, well forward of the rider.
  • The prop out of reach. Wakesurfers ride just a few feet behind the transom. Surfing behind an outboard or a traditional sterndrive, where the prop sits at the back, is widely considered dangerous and isn’t recommended.
  • A sound swim platform and clear sightlines for the driver and spotter.
  • An engine strong enough to carry ballast and passengers at surf speed without struggling.

Nice-to-haves

  • Factory ballast tanks, or room to add ballast bags.
  • A wake plate or wedge.
  • Speed control. Holding a steady 10–12 mph makes surfing much easier.
  • A factory surf system (tabs, gates or similar). This makes switching sides and shaping the wave easier, but it isn’t strictly necessary.

Used models riders often recommend

These names come up again and again in budget wakesurf discussions. Exact suitability varies by model year and how the boat has been kept:

  • Malibu Wakesetter 23 LSV and VLX (mid-2000s). Often described as strong wake producers for the money. Some years can be set up with Malibu’s Power Wedge.
  • Centurion Avalanche and Elite V (2000s). Frequently mentioned by surfers for hull designs that build a good wave.
  • Super Air Nautique 210 and 230. Respected all-rounders. Newer model years with surf systems command higher prices.
  • Axis A22 and A24. Malibu’s value line. Later model years often include surf features at a lower price than Malibu-branded equivalents.
  • Moomba (various). Positioned as a value brand and often recommended for budget buyers.
  • MasterCraft X-Star and X-series, Tigé, Supra. Older V-drives from these brands can also work well, especially with added ballast.

Treat this as a starting shortlist, not a ranking. A well-maintained boat from a less famous model will usually serve you better than a neglected “legend”. For brand context, see our best wakeboard boats and brands guide.

Surfing an older boat without a surf system

Before factory surf systems, riders made surf waves with weight distribution, and it still works:

  1. Add ballast. Fill factory tanks and add bags if needed. More displacement generally means a bigger wave.
  2. Shift weight to the surf side. Loading more ballast and passengers on one side lists the boat slightly. That cleans up one side of the wake into a surfable wave and washes out the other side.
  3. Adjust the wake plate or wedge, if fitted, to help push the stern down.
  4. Fine-tune speed. Small changes around 10–12 mph can change the wave noticeably.

Stay within the boat’s rated capacity on the capacity plate. That rating covers people and gear, and owners commonly treat ballast as part of the load. Overloading can make a boat handle poorly and take on water over the bow or transom, especially in waves from other boats.

Boats to avoid for wakesurfing

  • Outboard and conventional sterndrive boats, because of prop exposure. Some newer sterndrive “surf” models use forward-facing drives designed for it. Follow the manufacturer’s guidance.
  • Direct-drive ski boats. They’re safe to tow behind for skiing, but they’re designed for a small, flat wake and usually make a poor surf wave. See our wake boat vs ski boat comparison.
  • Boats with significant hull, stringer or transom damage. Ballast adds real stress.

Is a heavier boat better?

For wakesurfing, weight generally helps build a bigger wave, which is why ballast exists. In rough water, a heavier, longer hull with a deeper V also tends to ride more smoothly than a light, short one. The trade-offs are higher fuel use, a bigger tow vehicle requirement and more strain on an older engine and drivetrain. More weight is only useful if the boat is designed and rated to carry it.

How fast should a boat go for wakesurfing?

Most wakesurfing happens somewhere around 10–12 mph. Lighter riders and smaller waves may sit at the lower end, and heavier riders or a longer wave toward the upper end. Steady speed matters as much as the exact number.

Older boats can be great value, but certain problems are more common with age:

  • Soft floors, stringers or transom, especially on boats with wood in the structure.
  • Exhaust manifolds and risers on older engines.
  • Ballast pumps, hoses and bags that leak or fail.
  • Faded or torn upholstery and brittle wiring.
  • Worn V-drive and transmission components.
  • High hours without records. See our guide to wake boat engine hours.

Go through our used wake boat inspection checklist before you commit, and consider a professional marine survey.

Setting a realistic budget

Older V-drives that can surf with added ballast often sit in the roughly $20,000–$40,000 range. Newer used boats with factory surf systems usually cost considerably more. Leave room in the budget for initial servicing, ballast bags and any repairs found during inspection. Our wakeboard boat cost guide has fuller price ranges, and how expensive a wake surfing boat is compares new and used surf boat costs.

The complete guide to buying a wake boat

Best Wakeboard Boats and Brands
Read the guide

Keep exploring

Guides from other topics

All topics →