Before You Jump: Skills to Have First
Jumping the wake is one of the most exciting milestones in wakeboarding. It goes much better if you already have a solid foundation. Before trying your first jump, you should be able to:
- Get up consistently and ride comfortably between the wakes. Our beginner’s guide to wakeboarding behind a boat covers this.
- Steer and hold an edge on both your heelside and toeside. See how to edge and carve on a wakeboard.
- Cross both wakes in each direction without falling
- Ideally, do small ollies on flat water, so you’re used to the board leaving the water
Setup: Speed, Rope Length and Gear
- Speed: most riders learn to jump at the speed they’re already comfortable riding at. For many adults that’s somewhere in the high teens to around 20 mph. Our guide to boat speed for wakeboarding has more detail.
- Rope length: a slightly shorter rope keeps you closer to the boat, where the wakes are closer together. That makes the jump to the second wake shorter. Lengthen the rope as your jumps grow.
- Gear: a snug life jacket and a helmet are a good idea once you’re getting airborne.
How to Jump the Wake, Step by Step
These steps describe a heelside jump, where you approach the wake with your back to it, leaning on your heels. Most riders learn this one first, because it’s easier to stay balanced.
1. Cut Out and Set Up Wide
Edge out on your toeside to one side of the wake, far enough out to give yourself room to build speed. Once you’re out wide, ease off and let the boat pull you along for a moment, keeping the rope tight. Don’t let slack build.
2. Build a Progressive Edge
Turn toward the wake on your heelside and start the edge gently, then build pressure steadily as you approach. The goal is to reach your strongest edge right as you hit the wake. The most common mistake is cutting hard at the start and then backing off as you get close, which kills your speed and pop.
3. Hold Your Posture Up the Wake
Keep your knees bent, chest up, shoulders level and the handle low and close to your front hip. Don’t pull the handle toward your chest, and don’t lean back so far that you’re sitting on the tail. You want a strong, stacked position over the board as it rides up the face of the wake.
4. Stand Tall at the Top
As the board reaches the top of the wake, extend your legs and stand up tall. This straightening gives you “pop.” Wait until you reach the top. Standing too early, at the bottom of the wake, wastes the ramp and usually sends you up rather than out.
5. Spot Your Landing
In the air, keep the handle low and close to you, and look at where you want to land. For your first jumps, that’s the flat water between the wakes. For wake-to-wake jumps, it’s the downslope of the second wake.
6. Land and Ride Away
Land with your knees bent to absorb the impact, keeping your weight centered or slightly over your back foot, and your eyes up. Ride away smoothly, then set up to come back from the other side.
Start With Single-Wake Jumps
Before trying to clear both wakes, practice jumping off one wake and landing in the flat water between them. This lets you learn the edge, the pop and the landing with less height and distance. Once you’re consistently landing single-wake jumps, gradually build a longer and stronger edge until you start landing closer to the second wake.
Going Wake to Wake
To clear both wakes and land on the far side, you need more speed into the wake, so your edge typically has to start a bit wider and build for longer. Signs you’re close:
- Landing short (on top of or in front of the second wake): build a longer, stronger edge or start wider. Don’t just cut harder at the end.
- Overshooting the second wake: ease up slightly on your edge.
- Landing on the flat between the wakes: keep practicing. Your edge is improving but still needs more length.
Aim to land on the downslope of the second wake. It’s a much softer landing than the flat water beyond it.
Toeside Jumps
Toeside jumps, where you approach the wake facing it, leaning on your toes, are usually harder at first, because the body position is less natural. The same principles apply: progressive edge, handle low, stand tall at the top. A common tip is to keep the handle at your front hip and your shoulders fairly level, rather than letting your body twist open toward the boat. Start with small toeside single-wake jumps before trying to clear both wakes.
Common Mistakes and Fixes
| Mistake | What happens | Fix |
|---|---|---|
| Cutting hard early, then backing off | Little speed or pop at the wake | Build the edge progressively all the way to the wake |
| Standing up too early | You go up but not out, landing on the first wake | Wait until the board reaches the top of the wake |
| Pulling the handle to your chest | Rope slack and loss of balance in the air | Keep the handle low and close to your hips |
| Leaning too far back | Board shoots out in front and you land on your back | Stay stacked over the board with knees bent |
| Flattening the board before the wake | Jump loses power | Hold your edge until you leave the wake |
| Stiff legs on landing | Hard impact and falls | Bend your knees to absorb the landing |
Safety Tips
- Work up gradually. Small jumps you land are worth more than big ones you crash.
- Wear a helmet and a well-fitted vest.
- Make sure your spotter is watching and the driver holds a steady line and speed.
- If you’re tired, stop. Many falls happen at the end of a long session.
Once wake-to-wake jumps are second nature, many riders move on to grabs, spins and inverts such as the raley.