Wakeboard Gear

What is foil on a surfboard?

A foil on a surfboard is an underwater wing on a mast that lifts the board above the water. Learn its parts, how it works, how it attaches and where it's used.

On this page
  1. The short answer
  2. The parts of a foil
  3. How a foil lifts the board
  4. How the foil attaches to the board
  5. Where foils are used
  6. Choosing a foil: the basic trade-offs
  7. Can you put a foil on a regular surfboard?
  8. Is foiling safe?

The short answer

A foil on a surfboard is a hydrofoil: an underwater wing assembly mounted to the bottom of the board in place of regular fins. It’s made of a vertical mast attached to a horizontal fuselage that carries a front wing and a smaller rear wing. Once the board is moving fast enough, the wings generate lift and raise the board clear of the water, so the rider glides above the surface with only the mast and wings submerged.

Boards built for this are called foilboards or hydrofoil boards, and riding one is called foiling.

The parts of a foil

Part Role
Mast The vertical strut. Its length sets how high the board can ride above the wing
Fuselage The horizontal bar at the bottom of the mast that holds both wings
Front wing The main lifting surface, which largely decides how the foil feels
Rear wing (stabilizer) A smaller wing at the back that keeps the foil stable in pitch
Mounting plate Bolts the top of the mast to the board

Foils are usually made from aluminum, carbon fiber or a mix. Aluminum tends to be cheaper and tough. Carbon is lighter and stiffer but costs more.

How a foil lifts the board

A foil wing works much like an aircraft wing, but in water. As the wing moves forward, its shape and angle direct water so that it pushes the wing upward. Because water is much denser than air, a fairly small wing can lift an adult at modest speeds.

When the board lifts out of the water, drag drops sharply, because only the thin mast and the wings are still in contact with the water. That’s why foiling feels so smooth and why foilers can ride small, weak waves or long open-ocean swells that wouldn’t carry a normal surfboard.

The rider controls height by shifting weight. More pressure on the back foot raises the nose and increases lift. More pressure on the front foot lowers it. Keeping the board at a steady height is the core skill.

How the foil attaches to the board

Foil boards have a reinforced mount built into the bottom. A common design uses a pair of parallel tracks. The foil’s mounting plate bolts into the tracks and can slide forward or back to fine-tune the balance. Other systems use a box that the mast slots into. Either way, the mount is engineered to handle the strong leverage the mast puts on the board.

Where foils are used

  • Prone surf foiling: Paddling into waves lying down, then popping up on a foilboard.
  • SUP foiling: Standing and paddling into waves or swells on a larger foilboard.
  • Wing foiling: Holding a handheld inflatable wing that catches the wind.
  • Kite foiling: Pulled by a kite, often at high speeds.
  • Wake foiling: Towed behind a boat, then often riding the wake without the rope. See our guide to foil wakeboards.
  • eFoiling: A battery and electric propeller power the board, so no waves, wind or boat are needed. See electric self-propelled wakeboards explained.
  • Downwind foiling: Linking open-ocean wind swells over long distances.

Choosing a foil: the basic trade-offs

  • Bigger front wings lift at lower speeds and feel more stable, which helps when learning. They’re slower and less agile.
  • Smaller or high-aspect wings (longer and narrower) are faster and glide farther but are less forgiving.
  • Shorter masts keep you closer to the water, so falls are lower and the wing is less likely to breach. Many beginners start on one.
  • Longer masts let you ride higher and handle bigger chop, but they need deeper water and more control.

Rider weight matters too. Heavier riders generally need more wing area for the same lift.

Can you put a foil on a regular surfboard?

Generally, no. A standard surfboard has fin boxes designed for small sideways and twisting loads, not the leverage of a long foil mast. Attaching a foil to a board that isn’t built for it risks ripping the mount out or breaking the board. Foilboards are purpose-built with reinforced mounts. They’re also often shorter and wider for their volume than a comparable surfboard.

Is foiling safe?

It can be done safely, but the foil adds hazards that regular surfing doesn’t have. The wings are hard and can have sharp edges, and the board can be thrown in unexpected directions during a fall. Common precautions:

  • Fall away from the foil and protect your head with your arms.
  • Wear a helmet and an impact vest or life jacket, depending on the setting and local rules.
  • Only foil in water comfortably deeper than your mast, with plenty of margin.
  • Keep well clear of swimmers, surfers and other riders.
  • Take a lesson, especially for eFoiling and wake foiling.

If you’re curious about the powered versions, our answer to are electric surfboards real covers eFoils and jetboards in plain terms.

The complete guide to wakeboard gear

How to Choose a Wakeboard
Read the guide

Keep exploring

Guides from other topics

All topics →